Filter
Top Products
75
MAIN MENU
V MEMORY
SCREEN
RESET
AUTO POWER OFF
3SET UP
PICTURE
MENU : MENU OFF
5 : SEL. SET : NEXT
Menu Mode
1 Select SET UP. 2 Move the cursor to ABL and use the SET button to
change the current setting. Pressing the SET button
toggles ABL between ON and OFF.
Screen 1 Screen 2
• Conditions that allow adjustments: PC signals incoming
• Factory preset: ON
3) MP Mode On/Off
This accommodates video signal processing when reproducing PC signals. We advise setting MP MODE OFF for
still images and ON for motion pictures.
<About MP Mode>
For noninterlaced signals (such as those from PCs) and for animation found in game software, striped shadows may
sometimes appear in the moving portion of the image. This phenomenon, known as pseudo-contour, results from
the plasma display’s tone wedge characteristic. You can set MP mode ON to reduce pseudo-contour, but the tone
wedge may become slightly blurred,depending on the signal.
NOTE:MP mode has no effect on 1024 x 768, 87-Hz signals (interlaced), whether MP is ON or OFF.
1 Select SET UP. 2 Move the cursor to MP MODE and set the mode
with the SET button.
Pressing the SET button toggles mode ON or OFF.
Screen 1 Screen 2
• Conditions that allow adjustments: PC signals supplied
• Factory preset: ON
MAIN MENU
V MEMORY
SCREEN
RESET
AUTO POWER OFF
3SET UP
PICTURE
MENU : MENU OFF
5 : SEL. SET : NEXT
SET UP
SIGNAL : RGB
CLAMP : MODE1
3ABL : OFF
MP MODE : OFF
INPUT SETTING : PC
EXIT
5∞ : SEL. SET : CHANGE
SET UP
SIGNAL : RGB
CLAMP : MODE1
ABL : OFF
3MP MODE : OFF
INPUT SETTING : PC
EXIT
5∞ : SEL. SET : CHANGE