Filter
Top Products
83
Menu Mode
2) Adjustments at Menu Layers — 2 of 2 (each screen shows an example: details differ depending on selections
at layers)
In INPUT 1
(SCREEN not selectable)
In INPUT 3/4 with Input Setting
set to VIDEO and Input Signal
Format to RGB
(Display in the screen are the
same as above)
In INPUT 3/4 with
Input Setting set to PC
(Displays in the screen are the
same as above)
Note 1), Note 2)
Note 4)
Note 3)
Note 1: In INPUT 2, INPUT SETTING is fixed to VIDEO.
Note 2: CLAMP is fixed to MODE 2 when the input signal format (“SIGNAL”) is set to COMPONENT 1 or 2.
Note 3: The input signal format (“SIGNAL”) is fixed to RGB when INPUT SETTING is at PC.
Note 4: INPUT SETTING is automatically switched over depending on incoming signals.
Note 5: For U.S. models as well as for TAIWAN models.
Note 6: For EURO models.
In INPUT 2, or in INPUT 3/4
with Input Signal Format set
to COMPO-NENT 1 or
COMPONENT 2
(Displays shown in the screen
are the same as above)
Note 5)
MAIN MENU
3V MEMORY
SCREEN
RESET
AUTO POWER OFF
SET UP
PICTURE
MENU : MENU OFF
5∞ : SEL. SET : NEXT
MAIN MENU
3V MEMORY
SCREEN
RESET
AUTO POWER OFF
SET UP
PICTURE
MENU : MENU OFF
5∞ : SEL.
SET : NEXT
MAIN MENU
3V MEMORY
SCREEN
RESET
AUTO POWER OFF
SET UP
PICTURE
MENU : MENU OFF
5∞ : SEL.
SET : NEXT
MAIN MENU
3V MEMORY
SCREEN
RESET
AUTO POWER OFF
SET UP
PICTURE
MENU : MENU OFF
5∞ : SEL.
SET : NEXT
AUTO POWER OFF
3SETTING : OFF
EXIT
∞ : SEL. SET : CHANGE
SET UP
3COLOUR SYS : AUTO
EXIT
5∞ : SEL. SET : CHANGE
SET UP
3SIGNAL : COMPONENT 1
INPUT SETTING : VIDEO
EXIT
5∞ : SEL. SET : CHANGE
SET UP
3SIGNAL : RGB
CLAMP : MODE 1
INPUT SETTING : VIDEO
EXIT
5∞ : SEL. SET : CHANGE
SET UP
3SIGNAL : RGB
CLAMP : MODE 1
ABL : ON
MP MODE: ON
INPUT SETTING : PC
EXIT
5∞ : SEL.
CLAMP : MODE 2
SET UP
33D Y/C MODE : STILL
EXIT
5∞ : SEL. SET : CHANGE