Filter
Top Products
16
3.1 Installation Site Requirements
If the site requires modifications or special preparations for installation of the plasma display or its mounting hardware,
obtain permission in advance from the building owner or building authorities. To ensure installation safety, it is also
important to determine the strength of the installation site with the help of the original building contractor.
Safety Precautions
1) Structure of the installation site
Make sure you thoroughly understand the structure of the installation site before determining the most suitable installation
method. Buildings vary in structure and materials, and the appropriate mounting hardware will differ accordingly. When
drilling into walls, always remain aware of internal electrical wiring and pipes.
2) Weight capacity of the installation site
Select a location with a weight capacity sufficient to support the total weight of the display and mounting hardware.
3) Horizontal and flat surfaces
Select a flat and surface place for instruction and attach mounting hardware parallel to the pace of installation. Install the
unit so that the load is evenly applied to the ceiling or wall, as well as on mounting components such as hang bolts.
4) Sufficient work space
Select a location with sufficient space for installation work. The installation work should be conducted by more than two
persons.
5) Nearby equipment
Air conditioning ducts or lamps located near the installation site may be subject to dust, extreme temperatures, humidity,
and condensation during installation. Take suitable measures to protect them.
6) Safe locations
Do not install the unit where it may be easily reached or leaned against. Avoid locations subject to high vibration or
severe impacts.
7) Lighting conditions
• Consider existing lighting and sunlight angles when creating the installation layout. Extremely bright lighting can
reduce the visibility and quality of the display image.
• In extremely bright surroundings, adjusting screen intensity may not result in perceptibly brighter images. Keep in
mind that extreme intensity settings can reduce system service life.
8) Installation partially outdoors
The unit is designed for indoor use and is not suited for open-air use. Installation at locations even just partially exposed
to the elements may lead to malfunctions or breakdown caused by any of the following:
• Water and dust
• Change in temperature and humidity
• Salt-bearing wind
Direct sunlight upon the display degrades image quality. In installing the display, avoid sites exposed to direct sunlight.
Installation Site Requirements