Filter
Top Products
78
Menu Mode
6) Setting the Input Signal Format
INPUTS 3 and 4 support RGB and two component video signal types. INPUT 2 supports two component video signal
types. Thus, you must make the appropriate settings for the particular component.
This setting needs to be made separately for INPUTs 2, 3, and 4, as described below.
Example: • To reproduce RGB signals = SIGNAL: RGB
• To reproduce HDIV signals = SIGNAL: COMPONENT 1 (Note 1)
• To reproduce DVD players = SIGNAL: COMPONENT 2 (Note 1)
Note 1: Or try selecting COMPONENT 1 or 2 to determine which provides the best possible natural picture color.
1 Select SET UP. 2 Move the cursor to SIGNAL and change the setting
using with the SET button.
Pressing the SET button moves settings through
the sequence RGB, COMPONENT 1, and
COMPONENT 2.
Screen 1 Screen 2
• Conditions that allow adjustments: When reproducing video signals (other than PC signals) via INPUT 2, 3,
or 4. (For PC signals, input setting is set to RGB.)
• Factory preset: INPUT 2 to COMPONENT 2
INPUT 3 to RGB
INPUT 4 to RGB
MAIN MENU
V MEMORY
SCREEN
RESET
AUTO POWER OFF
3SET UP
PICTURE
MENU : MENU OFF
5 : SEL. SET : NEXT
SET UP
3SIGNAL : RGB
CLAMP : MODE1
INPUT SETTING : VIDEO
EXIT
5∞ : SEL. SET : CHANGE