Filter
Top Products
View Live Video
English 11
2Set the display mode for images (ID1/2/3)
You can set the display mode for live video and played back
images. Select a setting value from the pull-down menu of
each item and click .
1 READ INTERVAL (Initial setting: 1)
The display speed for images can be selected in five
levels. The larger the numeric value, the faster the
speed.
The actual display speed is influenced by the network
environment.
2 SIZE (Initial setting: 1)
The image display size can be selected from six levels.
The larger the numeric value, the larger the image.
3 QUALITY (Initial setting: 2)
The image quality of live video can be selected in three
levels.
The selected image quality is applied to all channel
images connected to the DVR.
Selections:
1: Low image quality
2: Standard image quality
3: High image quality
3Playback audio (ID2/3)
You can playback live and audio of reproduced audio at the
same time.
When playing back audio, be sure the optional application
software "DVR Viewer2 (Ver.2.0.0 or higher)" is installed on
the computer beforehand. (Refer to P36)
1
Click the channel selection button.
The screen will become the full screen display and the
setting menu for [AUDIO] will display.
2
Set [AUDIO] to "ON".
Audio data is played back after being buffered for a
fixed time. When [AUDIO] is set to "ON",
simultaneously select a buffering time.
Selections:
• OFF (initial setting)
• ON-5/10/15/20/30 (seconds)
3
Click .
The audio of the image will playback.
The display speed cannot be set when
[AUDIO] is set to "ON".
Because image quality cannot be selected
when playing back images, the setting menu
for [QUALITY] is not displayed.
12 3
• The audio cannot be played back in the
quad-screen and multi-screen.
• When playing back images with audio
attached, the audio will take precedence and
playback. Because of this, there is also a
possibility that the images will not display
depending on the environment.
What is buffering?
Buffering reads data in advance and saves a certain
amount.
If the buffering time is set to be long, the playback
quality will improve but time lags (delays) in the
audio will occur.
1
3
23