Sanyo DSR-3706PA DVR User Manual


 
24 English
Initial setting
(User level: ID3)
Setting the internal clock of the DVR.
Set the day/month/year/hour/minute using the pull down
menu. The day is automatically set according to the date.
Setting the automatic summer time change and the adjust
function of the clock of the connected DVR.
1 SUMMER TIME SET (Initial setting: USE)
Set the automatic summer time change function if the
DVR is used in a daylight saving area.
USE: Setting the automatic summer time change
function.
Set the summer time start (ON) and end
(OFF) date using [WEEK], [MONTH], [TIME].
NO USE:
Not setting the automatic summer time
function.
2 EXT. CLOCK SET (ADJUST TIME)
It automatically adjusts the time of each DVR if more than 2
DVRs are connected. Select the time at which all the clocks
will be adjusted using the pull down menu.
A signal is output to the clocks of the DVRs connected to
the [CLOCK OUT] terminal situated at the rear of the
DVR, everyday at the specified time, and their time
adjusted to the second.
Dates set as national holidays, anniversaries, etc are
considered as holidays and timer recording operations will
be the same as for Sundays.
Set the holiday dates using the pull down menu. Up to 20
dates can be set.
A
CLOCK SET
If the clock if not set on the DVR, recording and
camera control operations are not possible.
B
SUMMER TIME SET/EXT. CLOCK SET
1
2
C
HOLIDAY SET