Filter
Top Products
Recording settings (User level: ID3)
English 29
bExample of timer-controlled recording
Set the timer-controlled recording conditions based on the
following example.
To operate the timer recording click in the operation
panel.
The following message is displayed in the operating mode
display panel when timer controlled recording is on.
• Standby: TIMER STANDBY
• Timer recording: TIMER RECORDING
Example: Setting the timer to every Sunday from 7:30 to
18:00, recording rate of 25 FPS
1
Setting the timer-controlled recording
conditions.
1 Set [WEEK] to "SUN"
2 Set [START] to "7:30" and [STOP] to "18:00"
3 Set [PROGRAM] to "OFF"
4 Set [FPS] to "A 25 FPS"
5 Set [SET] to "ON"
Set other timer-controlled recording conditions through
the same procedure. You can set up to eight timer
recordings.
2
Click .
The timer setting is complete.
Example:
Recording every day from 10:00 to 20:00 using
the "P-1" recording pattern.
1
Setting the timer-controlled recording
conditions.
1 Set [WEEK] to "DLY"
2 Set [START] to "10:00" and [STOP] to "20:00"
3 Set [PROGRAM] to "P-1"
4 Set [SET] to "ON"
2
Click .
The setting of the timer recording conditions is
complete.
Example: Setting the timer to record 30 hours every
Saturday from 16:00 to 22:00 the next day,
recording rate of 25 FPS
1
Click [OVER 24H].
The last two rows (rows 7 and 8) used for over 24 hours
timer recording are displayed.
2
In the first row, set the day and time start of
the recording.
1 Set [WEEK] to "SAT".
2 Set [START] to "16:00".
3
In the second row, set the day and time at
which the recording will stop and the
recording conditions.
3 Set [STOP] to "22:00".
4 Set [PROGRAM] to "OFF"
5 Set [FPS] to "A 25 FPS"
6 Set [SET] to "ON"
4
Click .
The over 24 hours timer recording is set.
To set the timer by day
Timer
button
Operating mode display panel
1 2 3 4 5
Recording at the same time every day using timer
recording
Setting the timer for continuous recording lasting
more than 24 hours
Only one over 24-hour timer recording program
can be set.
If timer recordings overlap.
Priority is given as follows "Day timer → Daily timer
→ External timer".
If the both the day timer and the daily timer overlap,
the timer will start recording according to the
program that starts earliest. If the start time is the
same, the recording will be prioritized starting from
the upper row.
1 2 3 4
1 2
43 65
1
2
3