Sanyo DSR-3706PA DVR User Manual


 
English 25
Recording settings
(User level: ID3)
The proportion of each recording area on the internal HDD
is displayed. Recording operations will stop once the
recording area is full. However, recording operations can be
resumed by clicking the [AREA FULL RESET] button.
1 Recording area capacity display
The capacity of each recording area (proportion)
specified using the RECORDING AREA SET function of
the DVR is displayed. This cannot be changed using the
computer.
2 [AREA FULL RESET] button
This button is displayed depending on the settings of
[OVERWRITE] in RECORDING CONDITIONS SET.
Recording operations will stop once the space available
on each recording area is insufficient. To resume the
recording operations using overwrite, click
[OVERWRITE]. This operation is called [AREA FULL
RESET].
Normal/Alarm recording area settings
The button is only displayed if [OVERWRITE] is set to
"OFF".
Archive area settings
Buttons that are always displayed.
A
RECORDING AREA SET
Images are recorded (saved) on each recording
area according to the recording method chosen.
Recording area Recording method
NORMAL
RECORDING AREA
Normal recording
(manual recording)
Timer recording
ALARM RECORDING
AREA
Alarm recording
Pre-alarm recording
ARCHIVE AREA Copy (Save)
Setting [MIRRORING] to "ON" in the HDD SET
of the DVR will display the disk capacity of the
disk with the lowest capacity.
2
1
If [OVERWRITE] is set to "ON" for the normal
recording and the alarm recording area, or if
the normal recording area or alarm recording
area is set to "0%" the [AREA FULL RESET]
button is not displayed.
Resuming the recording operations using the
[AREA FULL RESET] button, will only
overwrite the data once. Full disk will result in
the interruption of recording operations.
To lock the DVR to overwrite mode set
[OVERWRITE] to "ON".
The [AREA FULL RESET] is not available if
there is still space available on each
recording area.