Sanyo DSR-3706PA DVR User Manual


 
Recording settings (User level: ID3)
28 English
If multiple cameras are connected to the DVR, the recording
rate of each camera can be set individually.
4 recording settings can be preset (P-1 - P-4).
Pre-programed settings can be used for NORMAL REC
MODE SET and TIMER SET.
1 PROGRAM
Specify a program number and set the recording rate for
an individual camera using 2. Different recording rates
can be set for each program.
Selections: P-1, P-2, P-3, P-4
2 SELECT INDIVIDUAL CAMERA RATE (FPS)
Select the recording rate for an individual camera.
By setting the rate of an individual camera rate to "OFF",
no images are recorded even if a camera is connected.
Available settings:
OFF, 25, 12.5, 6.25, 3.125, 1.563, 1, 0.5, 0.333, 0.25, 0.2, 0.1,
0.05, 0.033 (Unit: FPS)
3 [SAVE] button
Clicking [SAVE] will save the settings of the selected
program.
4 NORMAL REC
Once the program has been saved the estimated normal
recording time is displayed.
It allows you to set the recording conditions for timer
recording.
1 WEEK
To set the day for the timer-controlled recording.
To set the timer recording to the same time every day set
to "DLY".
2 START/STOP
Set the timer recording start and stop time.
3 PROGRAM (Initial setting: OFF)
You can select a program that has been preset (P-1 -
P-4) using PROGRAM REC SET.
4 FPS (Initial setting: 12.5 FPS)
To set the recording rate of the timer recording.
If the rate was set using [PROGRAM], the preset
recording rate will be used.
5 SET (Initial setting: OFF)
Select "ON" to enable the settings programed in this row.
The timer recording will start and stop accordingly.
Multiple timer controlled recording periods may be used
to divide recording times according to the conditions set.
6 EXT
If using an external timer set 3, 4 and 5.
The recording will occur according to the incoming signal
of the external timer. There is no need to set the day or
start and stop time.
7 [OVER 24H] button
When recording continuously for a period of over 24
hours using the timer recording, click this button to
display the appropriate program screen.
8 [SAVE] button
Clicking [SAVE] will save the timer settings.
D
PROGRAM REC SET
The menu screen may vary according to the
DVR model.
Recording rates available are limited when
pre-alarm recording or mirroring is set to
"ON". Refer to the DVR manual for more
information.
1
2
3
4
(Example screen for the 16-channel model)
E
TIMER SET
1 2 3 4 5
6
7
8