Sanyo DSR-3706PA DVR User Manual


 
General settings (User level: ID3)
34 English
The NETWORK SET allows you to set the network before
the DVR is connected to it. The menu on this screen
enables you to change DVR settings through the computer.
1 IP ADDRESS / SUBNET MASK / GATEWAY
Input values between "0 - 255"
2 PORT
Normally set to "80".
3 PASSWORD SETTING
It allows you to set a confirmation password according to
each user level. Type a password in each appropriate box.
Choose a 4 to 8 alphanumeric character password.
4 NETWORK SPEED (Initial setting: NO LIMIT)
It allows you to set the network transmission speed.
Available settings:
NO LIMIT, 64, 128, 256, 512, 1024Kbps
Displays the interface information set through the DVR
when using the system controller operations.
1 DATA SPEED (Unit: bps)
Shows the data transmission speed.
2 STATUS INFO
Displays the state of the transmission of the status
information.
3 ALARM INFO
Displays the state of the transmission of the alarm
information.
4 ADDRESS
Shows the set address.
D
NETWORK SET
After changing the network settings, switch to the DVR
operations. Reconnect the DVR with the network.
To choose a PORT setting other than the preset "80"
add ": (colon)" after the IP address and the PORT
number.
<Example when setting PORT to 81>
http://192.168.0.1:81/
User level ID1 ID2 ID3
User name ID1 ID2 ID3
Operations allowed
Live video monitoring
mmm
Playback
mm
Camera control
mm
Recording
m
DVR settings
m
Password (initial setting) 1111 2222 3333
Restarting or resetting the DVR will restore
initial setting (NO LIMIT).
2
3
4
1
E
RS-485 SET
1
2
3
4