Sanyo DSR-3706PA DVR User Manual


 
Search Recorded Images (User level: ID2/3)
16 English
1
Click "5. MOTION DETECTION SEARCH" in
the search menu.
The MOTION DETECTION SEARCH screen displays.
2
Specify a search area using "SEARCH
FROM".
Select the recording area targeted for the search.
Selections:
ALARM (alarm recording area)
NORMAL (normal recording area)
ALARM AND NORMAL
(Alarm/normal recording area)
3
Specify [CHANNEL].
You can specify a channel to narrow the search range.
Select "--" when a channel is not specified.
4
Specify an image range to search.
The start and stop date/time of the image recorded in
the DVR are displayed in [START] and [END].
Change the date and time of [START] and [END] when
narrowing the search range.
5
Click [SET].
The first image of the search range is displayed as a
still image in the PREVIEW screen.
6
Set the detection points for motion.
(MOTION SENSOR SET)
The setting frame of the motion detection point will
display in the PREVIEW screen as an 8 (vertical) x 10
(horizontal) square.
If you click over the square, a red mark will display and
be set to a motion detection point. If you click again, the
setting will be cleared. Set a motion detection point to
the required portion while viewing the PREVIEW
screen.
7
Set [MOTION SENSOR LEVEL].
Set the detection sensitivity of the motion sensor.
Selected value: OFF/1 (high) to 10 (low)
8
Click [PREVIEW].
Execute a motion detection search for images within a
specified search range.
When an image with movement is detected, it will
display as a still image in the PREVIEW screen.
9
Click PREVIEW screen.
Change to main screen and playback images. You can
perform normal playback operations after playback
starts.
5
MOTION DETECTION SEARCH
If a motion detection search is not performed,
click the PREVIEW screen as is. Change to
main screen and playback images.
6
5
8
7
2
3
9
4
Message box
Increase the set value if you want to avoid
detection of small vibrations or movements of the
object due to factors such as wind.
When multiple images with movement are
detected, the detected images will display in
order from the oldest each time [PREVIEW] is
clicked.
Message box display
Each time search conditions are set or when
the [SET] or [PREVIEW] buttons are clicked,
the search status and results will display in a
message box over the PREVIEW screen.
Display message:
SEARCHING
FOUND
IMAGES NOT FOUND!