Filter
Top Products
General settings (User level: ID3)
English 33
bSetting the buzzer using the computer
1
Create a "BUZZER" folder in the root directory
of the C drive.
2
Store the buzzer audio file in .WAV format
under "BUZZER.WAV" in the folder.
Example: C:\BUZZER\BUZZER.WAV
The above settings result in the computer activating the
audio file when the alarm is triggered.
Click (playback/stop button) of the operation panel.
Erase the created folder or the sound file or change the
sound file name or file location.
Displays the HDD information of the DVR unit.
Specifies the disk used to play back mirroring recordings.
1 DISK 1/DISK 2 (HDD Capacity)
Displays the total capacity of the HDD mounted on the
DVR. When two HDD units are mounted on the DVR, it
shows the individual capacity of each disk.
2 MIRRORING
Displays the mirroring recording settings of the DVR.
3 PLAYBACK DRIVE
It allows you to select the playback drive when multiple
HDD units are used and mirroring recording is to "ON".
Selections: DISK 1/DISK 2
A Activating the buzzer using the computer when
the alarm is triggered
• The buzzer is activated approximately
one second into the sound file. Create a
valid audio file so that it will start during
that period.
Do not use a large sound file.
• The computer buzzer is only activated
when the alarm is triggered.
B Stopping the computer buzzer
• Regardless of the computer buzzer settings,
when an alarm is triggered, clicking on the
playback/stop button will stop the buzzer.
• If the alarm is triggered while playing back
data, click the playback/stop button twice to
deactivate it.
C Deactivating the computer buzzer
C
HDD SET
What is mirroring?
Mirroring is when multiple HDD units are used
and the same image is recorded on 2 HDD units
at the same time. Mirroring allows you to read
normal images from a second disk in the unlikely
event that the images cannot be read from the
first disk.
The [PLAYBACK DRIVE] pull down menu is not
displayed when using a single HDD or if
mirroring recording is set to "OFF".
1
2
3