Filter
Top Products
Recording settings (User level: ID3)
English 27
It allows you to set the recording conditions of the normal
recording and timer-controlled recording of the DVR.
The quality of the image depends on "image quality x
recording rate". The higher frequency recording rate of the
image, the higher the quality of the image. However, the
amount of disk space needed to record these images is
proportional to the quality of the image. Therefore, selecting
a more quality image will result in shortened recording time.
1 PICTURE QUALITY (Initial setting: ENHANCED)
It allows you to set the quality of the image recorded by
the DVR.
Selecting a high quality image will result in shortened
recording time.
Selections:
BASIC: Basic image quality
NORMAL: Normal image quality
ENHANCED: Enhanced image quality
FINE: Fine image quality
SUPER FINE: Super fine image quality
2 AUDIO RECORDING (Initial setting: OFF)
Simultaneous audio recording is possible for normal and
timer-controlled recording.
ON: Simultaneous audio recording on
OFF: Audio recording off
3 REC RATE (Initial setting: 12.5 FPS)
To set the recording rate for normal recording.
The letter "A" is displayed in front of the available
recording rate.
Available settings:
50, 25, 16.67, 12.5, 8.333, 6.25, 5, 4.167, 3.571, 3.125, 2.778,
2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5,
0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Unit: FPS)
4 REC PROGRAM GROUP (Initial setting: OFF)
Recording conditions preset using PROGRAM REC SET
(program number) can be selected. (Refer to P28)
Selections: OFF, P-1, P-2, P-3, P-4
OFF: Programed recording is not used.
A common recording rate for all the connected
cameras is set using [REC RATE] on this
screen.
P-1 - P-4:
The DVR records the images at the rate
programed for each camera.
5 Recording duration
Clicking [SAVE], displays, for your reference, a rough
recording duration estimate according to the set
recording rate.
C
NORMAL REC MODE SET
• Audio data is recorded in the same
recording area as the images. Therefore,
recording time is shortened.
• If recording audio, set the recording rate
between "1 - 50 FPS".
1
2
3
4
5
About the Recording Rate
• If multiple cameras are connected to the
DVR, the recording rate of each channel
varies according to the number of cameras
connected.
• If you use PROGRAM REC SET to program
the recording rate of each individual
camera, the recording rate cannot be set
using NORMAL REC MODE SET.
• Recording rates available are limited when
pre-alarm recording or mirroring is set to
"ON". Refer to the DVR manual for more
information.
• Use the TIMER SET to program the
recording rate when using timer
recording. (Refer to P28)