69
Creating a Copy of the Edited Contents (Copy Dubbing)
Connecting a Digital Video Camera or Other Equipment
3 To use the default name, press </, to select
“OK,” then press ENTER.
Notes
• You cannot set a scene to be shorter than one second.
• In order for a One Touch Dub recording to be added to the DV Edit
List, “Add to Edit List” in Features Setup must be set to “On”
(page 81).
Creating a Copy of the
Edited Contents
(Copy Dubbing)
You can make copies of the programs in the DV Edit List.
Each time you dub a DV/Digital8 format tape, the start and stop
points of the selected scenes (called a “program”) are saved in a
DV Edit List. You can select a program from the DV Edit List
and use this information to copy the same contents onto another
disc of your choice.
To use this function, you will do the following:
Be sure to insert the original DV/Digital8 format tape that
corresponds to the program in the DV Edit List.
m
m
The recorder will fast forward and rewind the tape automatically
and record the scenes to a disc of your choice. On a DVD-RW
(VR mode), chapter marks are inserted at the start of each scene
and where the recordings stop on the tape. For other discs, the
recorder marks chapters either in 6 or 15 minute intervals
depending on the setting in “Auto Chapter” in Features Setup
(page 79).
a Follow steps 1 to 7 of “Preparing for recording
using the DV IN jack” (page 59), then press
SYSTEM MENU.
Be sure to insert the original DV/Digital8 format tape
that corresponds to the program in the DV Edit List.
b Press M/m to select “DV EDIT,” then press
ENTER.
The DV Edit menu appears.
Connect your digital video camera and prepare for recording
Select a program from the DV Edit List
Dub the selected scenes to a disc
</M/m/,,
ENTER
RETURN
SYSTEM MENU
x REC STOP
,continued
