Filter
Top Products
72
Recording From Equipment Connected to the LINE IN Jacks
z Hint
When the connected equipment outputs only monaural sound, use audio
cables that distribute monaural sounds to left/right channels (not
supplied).
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S
VIDEO cord (not supplied).
• Do not connect the output jack of this recorder to another equipment’s
input jack with the other equipment’s output jack connected to the
input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying
cannot be recorded.
Recording from connected equipment
a Turn on your TV and this recorder, then set
it to the connected channel (“VIDEO,” etc.).
b Press Z, and place a recordable disc on the
tray.
c Press Z to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
d Press INPUT SELECT to select a input
source according to the connection.
The front panel display changes as follows:
e Press REC MODE repeatedly to select the
recording mode.
The recording mode changes as follows:
f Select the audio input using the Tool menu.
A Press TOOL.
B Press M/m to select “Line Audio Input,” then
press ENTER.
C Press M/m to select the item, then press
ENTER.
• Stereo (default)
• Bilingual*
* When recording a bilingual programme on a DVD-RW (Video
mode), DVD+RW, or DVD-R, select the sound track, “Main” or
“Sub”, in “Bilingual Recording” of Options Setup (page 82).
g Press X REC PAUSE to set this recorder to
record pause.
h Insert the source tape into the connected
equipment and set to playback pause.
i At the same, press X REC PAUSE on this
recorder and the pause or play button on the
connected equipment.
Recording starts.
j To stop recording, press x REC STOP on
this recorder.
z Hint
You can adjust the settings for the recording picture before recording.
See “Adjusting the Recording Picture Quality and Size” (page 30).
Note
When recording a video game image, the screen may not be clear.
TOOL
M/m, ENTER
X REC PAUSE
x REC STOP
Z
REC MODE
INPUT SELECT
L2L1 L3 L4 DV
Programme
position
HQ SP LP EPHSP SLP