Filter
Top Products
70
Creating a Copy of the Edited Contents (Copy Dubbing)
Creating a Copy of the
Edited Contents
(Copy Dubbing)
You can make copies of the programs in the DV Edit List.
Each time you dub a DV/Digital8 format tape, the start and stop
points of the selected scenes (called a “program”) are saved in a
DV Edit List. You can select a program from the DV Edit List
and use this information to copy the same contents onto another
disc of your choice.
To use this function, you will do the following:
Be sure to insert the original DV/Digital8 format tape that
corresponds to the program in the DV Edit List.
m
m
The recorder will fast forward and rewind the tape automatically
and record the scenes to a disc of your choice. On a DVD-RW
(VR mode), chapter marks are inserted at the start of each scene
and where the recordings start on the tape. For other discs, the
recorder marks chapters either in 6 or 15 minute intervals
depending on the setting in “Auto Chapter” in Features Setup
(page 79).
a Follow steps 1 to 7 of “Preparing for recording
using the DV IN jack” (page 59), then press
SYSTEM MENU.
Be sure to insert the original DV/Digital8 format tape
that corresponds to the program in the DV Edit List.
b Press M/m to select “DV EDIT,” then press
ENTER.
The DV Edit menu appears.
c Press M/m to select “DV Edit List,” then
press ENTER.
The DV Edit List menu appears.
1 Disc mark
2 Program name
3 Total playing time
4 Date of editing or recording
d Press M/m to select the program you want to
record on a disc, then press ENTER.
The sub-menu appears.
e Press M/m to select “DV Dubbing,” then
press ENTER.
The display for entering a title name appears.
To enter a new name, select “Enter,” and follow the
explanations on page 18.
f To use the default name, press </, to
select “OK,” then press ENTER.
The default title name is fixed, and the display asks
whether to start recording. If you want to change the
recording mode, press </, to move the cursor
then press M/m to select the mode.
g Press </, to select “Start,” then press
ENTER.
The recorder starts recording the tape contents as
programmed.
To stop during recording, press x REC STOP.
h When the recording is finished, press
ENTER to select “Close.”
The display returns to the DV Edit menu.
i Press RETURN repeatedly to turn off the
display.
Connect your digital video camera and prepare for recording
Select a program from the DV Edit List
Dub the selected scenes to a disc
</M/m/,,
ENTER
RETURN
SYSTEM MENU
x REC STOP
DV EDIT LIST
DV11.10.2002 13:30 - 12.11.2002 16:46 1H12M 5.6
Title Name
Enter the title name.
DV11.10.2002 13:30 - 12.11.2002 16:46
OK Enter
SP
DV Dubbing
Change the recording mode if necessary.
Select "Start" to start dubbing.
Start Cancel