M102E/M501 TRS M501-TRS OPERATING INSTRUCTIONS
(Addendum to M101E Manual - P/N 04740 Rev A)
6.3. To Manually Adjust the Converter Oven
Temperature:
CAUTION !
DO NOT SET THE TEMPERATURE HIGHER THAN 1050OC
1. Set the main display to show the current value of the set variable by pressing the PV/SV mode
key.
2. To set each digit:
a. Press the up-arrow under that digit once. The digit will flash.
b. to increment that digit, press and hold the digit until the appropriate number is displayed.
c. To decrement that digit press and hold the DOWN key until the appropriate number is
displayed.
d. To increment/decrement the 1000’s digit it is necessary to adjust increment/decrement the
100’s digit up and down. Each time the 100’s digit passes “0” the 1000s digit will
increment or decrement correspondingly.
3. Once the desired value is reached, press the ENT key to store the new set value
4. Return the main display to process mode by pressing the PV/SV mode key once
EXAMPLE to change the set value from 950 to equal 1010.
ACTION RESULT
Press the PV/SV mode key The SV indicator will lit up and the display will
show 950.
Press the 10’s UP key once The 10’s digit will begin to blink
Press the DOWN key The 10’s digit will decrement from “5”. Release
the DOWN key when the 10’s digit reads “1”.
Press the 100’s UP Key once The 100’s digit will begin to blink
Press and hold the 100’s UP key The 100’s digit will increment from “9”. When it
passes “0” the 1000’s digit will increment to “1”.
Release the 100’s UP key.
-- The Display should now read “1010”
Press the ENTER key The new set value is recorded
Press the PV/SV mode key The current level of the process value will be
displayed.
05514 Rev A1 33