Filter
Top Products
M102E/M501 TRS CALIBRATION PROCEDURES
(Addendum to M101E Manual - P/N 04740 Rev A)
05514 Rev A1 37
7. CALIBRATION PROCEDURES
7.1. M102E Calibration
Calibration of the M102E should be performed according to the procedures described in Chapters
7 & 8 of the M101E Manual - P/N 04740 Rev A.
NOTE
It is recommended that the M102E be calibrated in TRS gas measurement mode using
H
2
S as a span gas.
If you are using the M102E for US-EPA controlled monitoring of SO
2
, see Chapter 8 of the M101E
Manual (P/N 04740 Rev A) for information on the EPA calibration protocol.
7.2. M501-TRS Calibration
The M501-TRS converter does not require field calibration.
USER NOTES: