Filter
Top Products
Chapter 2
Page 18
Parts of the System
TV Set Out
This connection provides good picture quality and good mono
sound quality (even if you have a TV or other devices that
provide stereo sound).
If you use TV S
ET OUT to watch satellite channels, you must
keep the TV(s) tuned to the same channel (either channel 3 or
4) as you sele cted on the Channel 3/4 Sw itch of the satellite
receiver.
The TV S
ET OUT can be switched between satellite programming and the
signal on the TV A
NTENNA/CABLE IN connection using the TV/VIDEO
button on the r emote control.
TV Antenna/Cable In
Use the TV ANTENN A/CABLE IN to connect a broadcast TV
antenna or cable TV box to the receiver. The TV A
NTENNA/
C
ABLE IN c onnection is only available through the TV SET
OUT as described above.
Phono (RCA) Audio/Video Outputs
These outputs provide high-quality picture and stereo
sound.
• If the TV has only one input f or this type of audio,
connect it to the r eceiver ’s R
IGHT AUD IO output.
• If you use these outputs to connect the receive r to other de vices, be sur e
to f ollow the instructions in the devices’ user m anuals.
Super Video (S-Video) Output
The receiver provides S-Vide o, which is the highest quality video
available . If you use this output for video, you must still connect
the audio with the P
HONO (RC A) AUDIO OUTPUTS or the DOLBY
®
DIGITAL output.
Dolby
®
Digital Output
The receiver provides Dolby
®
Digital encoded output and linear
Pulse Code Modulation (PCM) for an a udio amplifier/decoder
that can pr ocess this kind of output.
Phone Jack
Connect a phone cable with a standard RJ-11 phone plug to the
receiver her e, and then connect the cable to an active phone
jack.
Note:Youmust keep the receiver connected to a phone line at all time s to
buy Pay Per View programs or use e xciting interactive features.
Expansion Port
This port is r eserved for future use.