Filter
Top Products
M2488 PRODUCT GUIDE MEDIA CHANGER COMMANDS
March 1997 CG00000-011503 REV. A 6-15
6h UNIT ATTENTION Indicates the MODE SENSE command was not performed due to
one of the following:
1. The tape cartridge may have been changed.
2. The target has been reset.
3. The Mode parameters have been changed by another initiator.
4. The version of the microcode has been changed (microcode
downloaded).
5. A cartridge was loaded with a tape length that is too long or too
short.
Bh ABORTED COMMAND MODE SENSE command was aborted.
Dh VOLUME OVERFLOW Write of buffered data prior to the MODE SENSE operation failed
because physical End-of-Tape has been reached.
SENSE KEY CONDITION DESCRIPTION