Filter
Top Products
MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE
8-44 CG00000-011503 REV. A April 1997
8-11.2 Fan Assembly Remove and Replace Procedures
Refer to Figure 8-4 for location of the fan assembly.
Ensure that the power has been turned off and that the fan is no longer rotating prior
to removing the fan assembly.
8-11.2.1 Fan Assembly Removal
8-11.2.2 Fan Assembly Replacement
STEP ACTION
1 Remove the two exterior screws from the fan cover.
2 Swing out the fan cover plate to the left.
3 Disconnect CNP62.
4 Remove the four screws from the fan assembly.
5 Remove the fans.
STEP
ACTION
1 Replace the fans.
2 Insert the four screws into fan corners.
3 Connect CNP62 to CNJ62.
4 Close the fan cover.
5 Insert the two fan cover screws and tighten.
CAUTION
******************
* *
****************
Figure 8-4. Fan Assembly
fan cover