INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE
1-32 CG00000-011503 REV. A April 1997
1-6.7 Installation of the Flush-mount Automatic Cartridge Loader
** NOTE **
Use caution when handling the FACL. The cleaning cell protrudes
from the rear of the FACL and could be damaged by mishandling.
DO NOT use for lifting.
Refer to Table 1-4 for a list of equipment required to install the FACL on the M2488 tape drive. The
following flowchart illustrations the sequence of installation.
** NOTE **
The M2488 should be powered off and all cables and cords discon-
nected prior to performing this installation procedure. Follow stan-
dard procedures and cautions used when handling electronic
equipment.
Table 1-4. Equipment and Tools Required for FACL Installation
EQUIPMENT PART NUMBER QUANTITY DESCRIPTION
FACL CA01032-B001 1 Flush-mounted medium changer
Allen bolts Part of FACL accessory kit 3 Used for attachment to drive
Grounding plate Part of FACL accessory kit. 1 Attaches between FACL and drive
Phillips #2 screwdriver 1
Allen wrench (5mm) 1 8 inches long
FACL Installation
Prepare the M2488 Tape Drive
1-6.7.1
Prepare the FACL
1-6.7.2
Connect the M2488 and FACL
1-6.7.3
1-6.3
