Filter
Top Products
MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE
8-46 CG00000-011503 REV. A April 1997
8-11.4 Top Cover Remove and Replace Procedures
Refer to Figure 8-6 for location of the top cover. Remove the IPM, if installed, prior to removing the
top cover.
8-11.4.1 Top Cover Removal
8-11.4.2 Top Cover Replacement
Figure 8-6. Top Cover
STEP ACTION
1 Remove four screws from foot rails, if attached, and remove.
2 Remove six screws from sides and back of top cover.
3 Lift off top cover.
STEP
ACTION
1 Replace top cover on drive.
2 Screw in the six screws on the cover’s sides and back.
3 Attach foot rails with the four screws.
screws
screws
Foot Rails
top cover