Filter
Top Products
MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE
8-28 CG00000-011503 REV. A April 1997
8-5 FACTORY SETTINGS
The factory menu is used to set options during manufacturing and can be used to view M2488 informa-
tion such as serial number, tape motion time, and power-on time. This menu is also used to enable fac-
tory mode. The factory settings can only be changed when in factory mode. Entry and use of the factory
menu is described in the following paragraphs.
Table 8-22. Operator Panel Top Level Menus - Factory Option
TEST
and
UNLOAD
pressed
TEST
and
UNLOAD
released
*
→
OFFLINE
→
DIAGMODE
Selection and execution of off-
line diagnostics
Product Guide
Section 8-4
↓
START
SETTING
Access and configure user
settable options
User Guide
Section 4-2
↓
START
LOADCODE
Copy new firmware from a code
image tape cartridge into non-
volatile memory of M2488.
User Guide
Section 4-3
↓
START
INQUIRY
View M2488 Information User Guide
Section 4-4
↓
START
MODE PGS
Display or change selected Tape
Unit or Medium-Changer Mode
Pages
User Guide
Section 4-5
↓
START
FACTORY
TEST
→
Change factory mode settings,
enable factory mode, or enable
factory diagnostics.
Product Guide
Section 8-5