Filter
Top Products
Changing the TV Settings
Changing the TV Settings 51
■ Film mode automatically detects a film-based
source (originally encoded at 24 frames per
second) and then analyzes and re-creates each
still film frame for high-definition picture quality.
Set to On for automatic conversion of a film
source.
■ Range of OPC selects the image brightness
minimum and maximum range for the OPC sensor
automatic adjustments. OPC must be set to On.
Using Reset
To return all adjustment options to the factory preset
values, select Reset and press OK, and then select
Yes and press OK.
Using the Audio Menu
The Audio menu sets the sound levels and the option
for the Surround Sound setting.
The Audio menu is not selectable when the Output
Select option in the Option menu is set to Variable.
Adjusting the audio
In the Audio menu, select an item and adjust the scale
for Treble, Bass, or Balance. These options are not
selectable when Surround is set to On.
Set Surround to On to enjoy surround sound.
To control the audio output, including muting the
speakers, refer to the Output Select option in “Using
the Option Menu” on page 54.
Using Reset
To return all adjustment options to the factory preset
values, select Reset and press OK, and then select
Yes and press OK.
Using the Power
Control Menu
The Power Control menu sets options to allow you to
save energy by choosing to turn off the TV.
■ When there is no signal for 15 minutes.
■ When there is no operation for 3 hours.
Using the Setup Menu
The Setup menu options depend on the current input
source; items appear that apply for the selected input.
For example, Parental CTRL (used to select a secret
number and set the values for parental controls by TV
rating, TV content, and movie ratings) does not appear
when the selected input is Input 4 (HDMI).
Audio menu Options
Treble [scale]
Bass [scale]
Balance [scale]
Surround Off/On
Reset Yes/No
Power control menu Options
No Signal Off Disable/Enable
No Operation Off Disable/Enable
Setup menu Description
EZ Setup Starts guided setup.
CH Setup Scans for channels.
Antenna
Setup –
Digital
Displays air digital TV signal
and channel strength.
Parental
CTRL
Enables and defines parental
controls for TV and movies.
Input Skip Sets the TV to skip the HDMI
connectors (Input 4 or
MediaSmart) when selecting
the input source.
Position Adjusts image position on the
screen.
Input Label Selects a name (from a list) for
the input source.