Filter
Top Products
Changing the TV Settings
Changing the TV Settings 53
Using the Channel Strength option
1 With the Antenna set (refer to “Setting the antenna
using the Air/Cable option” on page 52 in the
previous topic), view the air digital channel on the
TV.
2 Press Setup on the remote control, and select
Channel Strength in the Setup/Antenna Setup
– Digital menu. Press OK.
3 Move or adjust the direction of the air digital
antenna until you obtain the maximum signal
strength. Press OK.
Using Parental CTRL
This option defines settings for parental control,
including setting the secret number (Secret No.); refer
to “Using Parental Controls” on page 56.
Setting Input Skip
This option sets the TV to skip the HDMI connectors
(Input 4 or MediaSmart) when selecting the input
source.
Setting Position
Use this Setup menu option to position the image on
the screen by setting horizontal and vertical values.
Settings depend on the input source; this option is for
AV inputs only. Select (view) the input source before
selecting the menu option and adjusting the image
position.
Setting Input Label
This option selects a name (from a list) for the input
source. You cannot change the TV label.
Setting Picture Flip
This Setup option sets the orientation of the picture.
Select (view) the input prior to setting the Picture Flip
mode.
Setting Standby Mode
This option sets the TV mode for standby.
Standby Mode may be set to Mode 1, which starts the
TV quickly from standby, or to Mode 2, which
conserves energy while on standby.
Setting Language
This option sets the OSD menu language; select
English, French, or Spanish.
Picture Flip mode Example
Standard (normal image)
Mirror (mirror image)
Upside Down (upside
down image)
Rotate (rotated image)
ABC
ABC
ABC
ABC