HP (Hewlett-Packard) SLC3760N Flat Panel Television User Manual


 
54 HP MediaSmart HDTV User’s Guide
Using Reset
To return Setup options to the factory preset values,
select Reset and press OK, and then select Yes and
press OK.
Using Reset does not change the Channel Setup, the
Parental CTRL password, or the Language settings.
Using the Option Menu
The Option menu items shown depend on the current
input source.
HDMI Setup sets options for the device
connected to Input 4: Signal Type, Audio Select,
and Auto View.
Audio Only, when set to On, turns off the video
to the display and only audio is output. Use this
setting to hear audio only when listening to music
from a music program.
Digital Noise Reduction, when set to High or
Low, minimizes analog noise or interference on an
analog channel.
Input Select sets the default type of signal or
connectors for the device connected to Input 1 or
Input 2.
For Input 1 and Input 2, you can select Auto,
Component, or Video.
Output Select selects what controls the audio
output at the speakers and the audio output
connectors (Audio Out and Digital Audio Out) on
the TV:
Fixed, the default setting, provides a constant
volume level to the audio output connectors, and
adjusts the volume to the TV speakers when you
use the Volume buttons on the remote control or
the top of the TV.
Variable provides an adjusted volume level to
the audio out connectors that adjusts when you
use the Volume buttons on the remote control or
the top of the TV, and mutes the TV speakers.
When you adjust the TV volume, the volume level
to the external audio system also adjusts, but the
TV speakers are always muted.
Quick Shoot, when set to On, provides a
clearer image for fast-action video. If video noise
occurs, set the function to Off.
Caption Setup selects options for Closed
Caption; refer to “Using Closed Caption” on
page 55.
Color System, selects the optimum color system:
Auto, NTSC, PAL-M, or PAL-N. Choose the video
signal system compatible with your equipment.
Title Display Type, when set to No, does not
show program information when you change the
channel.
Using the Digital
Setup Menu
This menu allows you to set the Audio Setup for
the Digital Audio Out optical connector when
watching TV.
HDMI
Setup Selectable items
Signal
Type
RGB/YCbCr 4:4:4/YCbCr 4:2:2
Select the signal type from an
HDMI terminal.
Auto
View
Enable/Disable
Set whether or not to use Aspect
based on signal recognition,
including an HDMI signal.
Audio
Select
Digital (HDMI)/Analog
(R and L audio)
Select Analog when using an
DVI-to-HDMI converter at Input 4.
Digital Setup menu Description
Audio Setup Sets the Digital Audio
Out mode.