Filter
Top Products
10
Setting Up Your VCR
(cont'd)
Setting your VCR's tuner
The Auto Set feature introduced here automatically assigns receivable channels in your area to the CHANNEL UP/DOWN buttons
and skips the others so you won't have to go through any "blank" channels to get to the one you want.
TUNER SET
ŁBAND
AFC
AUTO CHANNEL SET
MANUAL CHANNEL SET
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
PRESS (SELECT, SET +/–)
PRESS (MENU) TO END
TURN ON THE VCR
1
Press POWER.
Ⅲ If watching on channel 3 or 4, press TV/VIDEO to select
the VIDEO mode. The VCR's VIDEO indicator will light.
ACCESS THE ON-SCREEN MENU
2
Press MENU to access the
Main Menu screen.
Ⅲ If the VCR Plus+ screen
appears press MENU again.
3
Press SET to move the cursor
to "TUNER SET", and then
press SELECT.
4
Press SET to move the cursor
to "BAND", and then press SELECT.
SELECT THE BAND
5
Press SET to choose "TV" or
"CATV".
Ⅲ The BAND select feature
has 2 settings (TV and
CATV). Set to TV if your
antenna provides only UHF
and VHF channels. Set to
CATV if your antenna
system is a cable TV line.
6
Press MENU.
START AUTO SET
7
Press SET to move the cursor to "AUTO CHANNEL SET",
and then press SELECT.
Ⅲ Auto set is in progress and "SCANNING..." is displayed.
Ⅲ When available channels are scanned, "ADD" will be
displayed on the screen.
Ⅲ When unavailable channels are skipped, "SKIP" will be
displayed.
Ⅲ After completion of auto set, the lowest tuned-in channel
number and "SCAN COMPLETED" are displayed.
Ⅲ If "SCAN COMPLETED — NO SIGNAL —" is
displayed, check the band setting and connections, and
start again.
੬ p.8.
RETURN TO THE TV SCREEN
8
Press MENU as many times as necessary to exit.
You can also use the POWER, MENU, SET
and SELECT buttons on the VCR.
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BAND
ŁTV
CATV
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END
AUTO CHANNEL SET
(TV)
CH 5 ADD
SCANNING . . .
PRESS (MENU) TO END
TUNER SET
BAND
AFC
ŁAUTO CHANNEL SET
MANUAL CHANNEL SET
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
PRESS (SELECT, SET +/–)
PRESS (MENU) TO END
POR INSTRUCCIONES EN
ESPAÑOL VEA p. 40 – 41.
FOLLOW INSTRUCTIONS ON THIS PAGE OR ON P. 12 – 14
DEPENDING ON YOUR CABLE BOX.
Now go to ੬ p. 15 "Setting up the VCR Plus+ feature".
1
23
4
56
7
89
0
TV/VIDEO
3,4,7
5
2,6,8
1
HR-IP820U-EN-1 97.5.20 5:25 PM Page 10