Filter
Top Products
Recording
23
LOAD A CASSETTE
1
Insert a cassette with the safety tab present.
Ⅲ The VCR power will come on automatically.
Ⅲ "READING TAPE#..." will appear on the screen unless
INDEX Plus+ functions are set to OFF. (
੬ p. 12 of
INDEX Plus+ instruction manual.)
Ⅲ If watching on channel 3 or 4 be sure that the VIDEO
indicator is lit. If the indicator is not lit, press TV/VIDEO
so that it lights.
CHOOSE A PROGRAM
2
Press CH(annel) +/– (or the digit keys followed by ENTER)
to select the channel you wish to record.
Ⅲ Even if you don't press ENTER, the channel will
automatically change in about 2 seconds.
SET THE TAPE SPEED
3
Press SP/EP.
TO START RECORDING
4
Press REC and PLAY simultaneously.
Ⅲ If "PLEASE ENTER THE CABLE BOX CH NUMBER"
appears on the screen, input the cable box channel using
the digit keys, then press ENTER.
Ⅲ If "TAPE# CAN NOT BE READ" appears on the screen,
refer to page 13 of INDEX Plus+ instruction manual.
TO PAUSE RECORDING
5
Press PAUSE.
6
Press PLAY to resume recording.
TO STOP RECORDING
7
Press STOP.
TV signals being received by the VCR's built-in tuner can be recorded onto a video tape. This is realtime video recording.
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
1
During Recording...
1 Press TV/VIDEO. The VCR's VIDEO indicator and the TV
broadcast being recorded will disappear.
2 Use the channel controls on the TV to select the other
channel you wish to view.
Ⅲ The program selected with the TV channel controls will
appear on the TV screen while the one selected with the
VCR channel controls will be recorded on the tape.
To watch a program while recording
another
Before starting recording...
1 Press C. RESET.
Ⅲ The counter will be reset to "0
H 00M 00S", and will show
the exact elapsed time as the tape runs.
2 After starting recording, press OSD at any time to check the
elapsed time on the TV screen.
3 Press OSD again to clear it from the screen.
To display the elapsed recording time
POR INSTRUCCIONES EN
ESPAÑOL VEA p. 40 – 41.
1
23
4
56
7
89
0
Digit keys
3
7
4
5
2
6
C. RESET
ENTER/
OSD
TV/VIDEO
HR-IP820U-EN-2 97.5.20 5:32 PM Page 23