Filter
Top Products
10
When you choose to view a program from the host
broadcasting station (or from a preferred channel after
downloading), certain related information will be
displayed if it is sent by the host sation.
To confirm whether or not the host station is sending
information, perform the procedure described below.
Preparation
1. Turn on the power to the TV and the VCR.
2. Set the TV to the channel or mode appropriate for
video playback.
Procedure
1 Press TITLE. If the
information is available
from the host station,
this display appears:
If the host station is not
sending the information, the
display looks like this:
NOTES:
● Depending on the program, the time remaining in
the program may not be displayed.
● If a cable box is connected and in use, the channel
number will not be displayed.
● If you press TITLE during recording or playback, the
appropriate screen from step 1 appears. However,
during playback, the remaining time, date and time
indications do not appear. (During playback, the
channel number, station name and program title
may not appear.)
Using INDEX Plus+, you
can receive data such as
CSPG data from the host
station. The host station
sends CSPG data up to
4 times a day. If your TV is
turned on and set either to
the video channel or its
AV mode, the display above appears to inform you
that data will be received:
The number in the upper
right hand corner of the
screen indicates the time
remaining (in seconds) until
data reception begins. If you
don't want the data, press
CANCEL. ("... OR CABLE
BOX" only appears if you're
using a cable box.) During reception of download data,
the screen above appears:
To stop reception of data in progress, press CANCEL.
* If using a cable box to receive cable channels, the
* cable box power must be on in order to download
* data from host station.
To watch a TV broadcast during reception of
download data...
● If using the RF connection, press the TV/VIDEO
button so that the VCR's VIDEO indicator goes out.
● If using the AV connection, change the TV's input
mode from AV to TV.
● If using a cable box, it is not possible to view cable
box channels during the reception of download data.
Then use the channel selector on the TV to select the
channel you wish to view.
Once the host station scan is completed, you can
access the download schedule for data.
Procedure
1 Follow the instructions
under "Download
Function Confirmation"
on page 5 for accessing
the DOWNLOAD
FUNCTION SETUP
screen.
2 Press "0" and the
DOWNLOAD
SCHEDULE screen
appears.
3 Press MENU twice to return to the normal screen.
Information From Host Station
Receiving Broadcasts
CH 23 KABC 4/14 7:00AM
World news
REMAINING 1:10
CH 23 3/08 10:25AM
Download Data
Download Schedule
59
THE DOWNLOAD PROCESS
WILL START SOON
(TV/VIDEO)
PRESS(CANCEL)TO CANCEL
DOWNLOAD PROGRAM TITLES
NOW IN PROGRESS
PLEASE DO NOT TOUCH
THE VCR OR CABLE BOX
(TV/VIDEO)
PRESS(CANCEL)TO ABANDON
DOWNLOAD FUNCTION SETUP
DOWNLOAD FUNCTION
ZIP CODE
TIME ZONE
ANTENNA CONNECTION
PREFERRED CHANNEL
PRESS(SELECT,SET+/-)
(0):SCHEDULE (MENU):END
DOWNLOAD SCHEDULE
START DURATION
1 3:30AM 0:30
2 4:30AM 0:30
3 5:30AM 0:30
4 6:30AM 0:30
PRESS(MENU)TO END
ATTENTION
● Download CSPG data cannot be received when
the VCR's power is on. In order to receive
download CSPG data, the VCR's power must
be off during a scheduled download period.
Remember to turn the VCR off when it's not in
use. If you pressed CANCEL to stop reception,
the command is only effective until the VCR is
turned on and off again. Then the VCR begins
receiving data again (if it's being transmitted).
● Once data reception ends, you can view CSPG.
(Refer to page 11 of this instruction manual.)
HR-IP820U INDEX Plus+ 97.5.20 5:45 PM Page 10