Filter
Top Products
INPUT THE GUIDE CHANNEL
4
Press SET or the Digit keys to
input the Guide Channel
number (as shown in TV
listing or this manual), and
then press SELECT.
INPUT THE RECEIVING CHANNEL
If you don't use an external
Cable Box . . .
5
Press SET or the Digit keys to
input the channel number your
VCR receives the station on,
and then press SELECT.
Ⅲ If there are other GUIDE CH
numbers which don't match
with the VCR CH numbers, input the changes by repeating
steps 4 – 5.
If you use an external Cable Box . . .
5
Press SET or the Digit keys
to input the channel number your
Cable Box receives the
station on, and then press SELECT.
Ⅲ If there are other GUIDE CH numbers which don't match
with the CABLE CH numbers, input the changes by
repeating steps 4 – 5.
CHECK THE GUIDE CHANNEL MAP
6
Press MENU once to go back
to the Tuner Set menu.
7
Press SET to move the cursor
to "GUIDE CHANNEL MAP",
and then press SELECT.
Ⅲ A screen with GUIDE CH
numbers (in ascending order)
with their corresponding
VCR CH numbers will be
displayed. Check to make
sure your entries are correct.
Ⅲ If there are more than 10
entries, press SELECT to
display the 11th and higher
entries.
RETURN TO THE TV SCREEN
8
Press MENU as many times as necessary to exit.
Ⅲ After host station scanning, if
Guide Channel Setting is
completed automatically, a
screen like the one to the
right appears prior to the
normal screen.
You can choose whether or
not the Guide Channel will
automatically be updated when changes or additions
occur. To select automatic updating, press 1.
To make changes manually, press 2.
16
Setting Up Your VCR (cont'd)
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
GUIDE CHANNEL SET
GUIDE CH : VCR CH
15:15
PRESS
PR(SELECT, SET +/–, DIGIT)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH : VCR CH
15:38
PRESS
PR(SELECT, SET +/–, DIGIT)
PRESS (MENU) TO END
TUNER SET
BAND
AFC
AUTO CHANNEL SET
MANUAL CHANNEL SET
GUIDE CHANNEL SET
ŁGUIDE CHANNEL MAP
PRESS (SELECT, SET +/–)
PRESS (MENU) TO END
GUIDE CHANNEL MAP
GUIDE :VCR GUIDE :VCR
6 : 47 10 : 55
12 : 41 15 : 38
33 : 28 67 : 49
PRESS (SELECT) TO NEXT
PRESS (MENU) TO END
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
23
4
56
7
89
0
TV/VIDEO
2,6,8
2,3,4,
5,7
4,5
1
NOTES:
Ⅲ After host station scanning (refer to page 6 of the INDEX Plus+
instruction manual), when Guide Channel Setting is taking place,
changes or additions are also performed if you pressed 1 in step 8 .
Ⅲ If you pressed 2 in step 8 but later decide you want automatic
updating, you have to re-perform host station scanning (refer to page
6 of the INDEX Plus+ instruction manual).
GUIDE CHANNEL UPDATE
1 AUTOMATIC UPDATE
(YOUR MANUALLY INPUT
DATA WILL BE ERASED)
2 DO NOT UPDATE
(MANUALLY INPUT DATA
WILL BE RETAINED)
PRESS (1) or (2)
HR-IP820U-EN-1 97.5.20 5:25 PM Page 16