Filter
Top Products
Getting To Know Your VCR (cont'd)
6
Display Panel
When you do not want to show the indications – for example when
you dub a tape to another VCR (using this VCR as the player), set
SUPERIMPOSE to OFF.
1 Press MENU, SET and SELECT
to access the "SUPERIMPOSE"
screen.
੬ p. 7
2 Press SET to Choose OFF.
3 Press MENU as many times as
necessary to exit.
Ⅲ Setting is completed, and a
normal TV screen is displayed.
On-Screen Mode Superimpose
Ⅲ The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new channel
is displayed on the screen for 5 seconds.
Operation mode
When the operation mode is changed, the
new mode is displayed — RECORD (5
sec.), PLAY (5 sec.), FF/REW (5 sec.,
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
Clock time
Tape speed indicator
Counter memory on/off
Counter reading
1 Press ENTER/OSD.
Ⅲ All indications corresponding to the current
status are displayed for 5 seconds, leaving the
counter information, and RECORD/PAUSE if in
the Record Pause mode, on the screen.
2 Press ENTER/OSD again to clear the display.
To recall an indication
CH 125 RECORD
SUN 12:00 AM PAUSE
] SP
INDEX-1
NORM MEMORY OFF
HI-FI COUNT –1:23:45
Audio mode indicators
To stop the on-screen indications from being
shown
SUPERIMPOSE
ON
Ł OFF
PRESS (SET +/–) FOR CHOICE
PRESS (MENU) TO END
HMS
ITR TIMER
VIDEO
M
SP
EP
REC
SAP
PAUSE
ST
AM
PM
PLAY
L
dB
–20 15 10 8 4620246
+
8
R
dB
–20 15 10 8 4620246
+
8
Mode Indicators Clock Display
Instant Timer
Recording
Video mode
"Cassette Loaded" mark
Timer mode
Counter Display
Channel Display
("AU" for AUX mode)
Mode Indicators
Recording
Playback
Tape speed
"Counter Memory" mark
AM/PM Indicators
Pause
(Displayed together with "REC" while
recording is paused, and with "PLAY"
during still or slow motion)
Ⅲ Pressing DISPLAY lets you change the type of display: Counter, Channel*, or Clock.
Ⅲ Whenever the VCR is turned off, the FDP's brightness is automatically dimmed.
* Channel is not displayed during playback.
Multichannel TV Sound Indicators
Audio level meters
INDEX indication
HR-IP820U-EN-1 97.5.20 5:25 PM Page 6