Filter
Top Products
26
Your video recorder is equipped with the VCR Plus+ programming system. This programming system greatly simplifies timer
programming because you won't have to enter all the data that is usually necessary (such as date, start and stop time, and channel).
Simply key-in the PlusCode number for the TV program you wish to record and the VCR's timer will be programmed. The PlusCode
VCR Plus+ programming is not possible unless you have already....
set the VCR's clock
set the VCR's tuner
made necessary changes in the Guide Channel Set screen.
VCR PLUS+
23699
PRESS (DIGIT)
THEN PRESS (SELECT)
PRESS (MENU) TO END
(Continued on next page.)
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
VCR PLUS+
PRESS (DIGIT)
THEN PRESS (SELECT)
PRESS (MENU) TO MAIN MENU
LOAD A CASSETTE
1
Insert a cassette with the safety tab present.
Ⅲ The VCR power will come on automatically.
Ⅲ If watching on channel 3 or 4 be sure that the VIDEO
indicator is lit. If the indicator is not lit press TV/VIDEO
so that it lights.
INPUT THE TV PROGRAM'S CODE
NUMBER
2
Press MENU.
Ⅲ The "VCR PLUS+" input
screen will be displayed.
3
Press the Digit keys to enter
the PlusCode number for
the TV program you wish to
record.
Ⅲ To make corrections, press
CANCEL and re-input with
Digit keys.
CHECK FOR CORRECTNESS
4
Press SELECT.
Ⅲ The settings for the PlusCode
number you just entered will
be displayed.
Ⅲ If the settings are incorrect
and do not match the program
you wish to record, press
CANCEL and, after
pressing MENU three times, re-input the PlusCode number.
SELECT THE TAPE SPEED
5
Press SP/EP.
PROGRAM 1
(VCR PLUS+ 23699 )
DATE 12/25 MON
START 18:00 PM
STOP 10:00 PM
CHANNEL 11:25 SP
PRESS (8=DAILY, 9=WEEKLY
PRESS SP/EP=REC SPEED)
PRESS (MENU) TO END
PROGRAM 1
(VCR PLUS+ 23699 )
DATE 12/25 MON
START 18:00 PM
STOP 10:00 PM
CHANNEL 11:25 EP
PRESS (8=DAILY, 9=WEEKLY
PRESS SP/EP=REC SPEED)
PRESS (MENU) TO END
Timer-Recording with VCR Plus+
1
23
4
56
7
89
0
5
3
4
2
CANCEL
HR-IP820U-EN-2 97.5.20 5:32 PM Page 26