Filter
Top Products
21
To reset the tape counter to zero.
1 Press C. RESET.
Ⅲ Pressing DISPLAY repeatedly changes the VCR's
displayed indication. (Counter reading [ Channel* [
Clock time).
*Channel is not displayed during playback.
Counter Reset
To return to tape position zero.
During Playback...
1 Press C. RESET at a point you wish to locate later.
Ⅲ The counter will read "0
H 00M 00S".
2 Press C. MEMORY.
Ⅲ
Counter Memory mark is displayed.
3 When you wish to return to that point, press STOP and then
press REW.
Ⅲ The tape will rewind and stop at about "0
H 00M 00S"
automatically.
4 To cancel the Counter Memory mode, press C. MEMORY.
Counter Memory
You can "tell" the VCR what to do immediately after rewinding.
During Stop:
For automatic start of playback after the tape is rewound...
1 Press REW.
2 Press PLAY within 2 seconds.
For automatic power off after the tape is rewound...
1 Press REW.
2 Press POWER within 2 seconds.
For automatic timer standby after the tape is rewound...
1 Press REW.
2 Press TIMER within 2 seconds.
Ⅲ To do the above using the VCR's controls:
During Stop, turn the Shuttle all the way to the left and
release it instead of pressing REW, and then press PLAY or
POWER within 2 seconds.
Ⅲ If you want the "next function" to automatically start when
the counter reads "0
H 00M 00S" (instead of at the beginning
of the tape), press C. MEMORY so that the counter
memory "M" mark appears on the VCR display panel
before pressing REW or FF.
Next-Function Memory
POWER Shuttle ring
+
–
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
PLAY
1
23
4
56
7
89
0
C.RESET
DISPLAY
POWER
TIMER
PLAY
C.MEMORY
REW
STOP
HR-IP820U-EN-1 97.5.20 5:25 PM Page 21