Filter
Top Products
31
When recording using INDEX Plus+, your VCR writes
all directory data directly onto the tape. In the unlikely
event that data that was stored in the VCR's memory
is lost, it can be restored to memory from the last
recorded tape. Perform the following procedure to
restore data to memory.
Preparation
1. Turn on the power to the TV and the VCR.
2. Set the TV to the channel or mode appropriate for
video playback.
Procedure
1 Press INDEX Plus+. A
screen like this appears:
The Tape Numbers of the two most recent additions to
memory are displayed.
2 To initiate restoration, insert the tape corresponding
to the Tape Number that appears to the right of
"LATEST", or press CANCEL to return to the
normal screen.
3 The following screens appear:
To quit the process, press CANCEL.
● Pressing CANCEL at the first and second screens in
step 3 returns you to the normal screen.
● Pressing CANCEL at the third screen in step 3
brings up the following confirmation screen:
If you're sure you want to stop, select "YES" by
pressing ENTER. The FAILURE screen appears.
Press CANCEL to return to the normal screen. If you
decide not to abandon the process, select "NO" by
pressing CANCEL. The RESTORING TAPE#...
screen reappears and restoration continues.
Upon completion of
restoration, the screen to
the right appears:
Once restoration is complete, press CANCEL to return
to the normal screen.
NOTES:
● The directory for the back-up tape used in data
restoration will not copy correctly. To ensure that the
back-up tape's own directory is copied correctly, first
erase the previously copied version from the VCR's
memory (refer to "Erasing A Directory" on page 21
of this instruction manual). Then perform the
"Uploading A Directory" procedure (
੬ page 23 of
this instruction manual).
● Transferring and restoring may occasionally be
unsuccessful, depending on the condition of the
tape.
● If restoration is unsuccessful using the LATEST
tape, use the SECOND tape. Any data stored on
that tape is completely restored.
● Restoring may occasionally be unsuccessful,
depending on the condition of the tape.
● If you stop a restoration in progress, it ends
incomplete. In this instance you need to initialize the
library (
੬ pg. 29).
Restoring Lost Data
LIBRARY LOST!
PLEASE INSERT ONE OF
FOLLOWING BACK-UP TAPES
TAPE#
LATEST 1468
SECOND 1382
PRESS(ENTER)TO RESTORE
PRESS(CANCEL)TO RETURN
SEARCHING TAPE#...
PRESS(CANCEL)TO RETURN
ARE YOU SURE ?
ABANDON !
(ENTER) : YES
(CANCEL) : NO
COMPLETE
PRESS(CANCEL)TO RETURN
RESTORING TAPE#1468
3/78
PRESS(CANCEL)TO ABANDON
number
of titles
remaining
total number
of titles
SEARCHING
BACK-UP DATA...
PRESS(CANCEL)TO ABANDON
HR-IP820U INDEX Plus+ 97.5.20 5:45 PM Page 31