Filter
Top Products
27
TO MAKE CHANGES IN THE
SETTINGS
You can delay a program's stop time or make other such
"revisions" in the settings.
1 After step 5, press SELECT.
2 Press SELECT to move to the
setting you wish to change, so
that it blinks.
3 Press SET to make the change.
4 Return to step 6.
TO DISENGAGE THE TIMER
For safety, when AUTO TIMER is "OFF", your VCR disables all
other functions while in the timer mode.
Ⅲ To use your VCR, first disengage the timer mode by pressing
TIMER again. Now all functions will be operable.
Ⅲ To re-engage the timer, press TIMER.
"ERROR" WARNING
If the PlusCode number you input
is incorrect, "ERROR" may appear
on the screen to advise you of the
error. This happens when the code
is for a program which has already
passed. "ERROR" is displayed for
about 4 seconds and returns to the
input screen (step 2).
RETURN TO THE TV SCREEN
6
Press MENU.
Ⅲ Select the desired Auto Timer setting. See page 30 for
details.
7
Press MENU again.
SET TO TIMER MODE
8
Press TIMER.
Ⅲ The VCR will enter the timer mode and power will go off.
For AUTO TIMER and other timer programming features, ੬ p. 30.
For other error indications,
੬ p. 37.
This function lets you set the recorder to timer-record at the same
time every day, Monday through Friday.
Ⅲ After pressing SELECT in step 4, press DAILY (Digit key 8).
"DAILY" will appear.
To Timer-Record Daily Serials
This function lets you set the recorder to timer-record at the same
time on the same day every week.
Ⅲ After pressing SELECT in step 4, press WEEKLY (Digit key
9). "WEEKLY" will appear.
To Timer-Record Weekly Serials
PROGRAM 1
DATE 12/25 MON
START 18:00 PM
STOP 10:05 PM
CHANNEL 11:25 EP
PRESS (SELECT, SET +/–)
PRESS (MENU) TO END
VCR PLUS+
23699
ERROR
PRESS (DIGIT)
THEN PRESS (SELECT)
PRESS (MENU) TO END
NOTES:
Ⅲ If there is a power failure the VCR will remember your timer-record
selections for 10 minutes.
Ⅲ If a program that is being timer-recorded sends a timer-extension
signal, the VCR automatically extends recording time to
accommodate the change. (INDEX PLUS+ FUNCTIONS SETTING
must be set to "ON". Refer to page 8 of the INDEX Plus+ manual.)
1
23
4
56
7
89
0
WEEKLY
DAILY
(M-F)
8
6,7
HR-IP820U-EN-2 97.5.20 5:32 PM Page 27