Filter
Top Products
5-3SectionL: Data Link
46
5-3-1 Data Link Areas and Data Link Tables
Manually set data links are created by setting data link areas in data link tables.
There are two types of Data Link Table Edit Screen.
Node Information Screen
The Node Information Screens are used to specify the nodes for which data link
tables are to be created or edited. The Data Link Table Screens can be displayed
from these screens. There are two Node Information Screens (one for nodes 1 to
32, and one for nodes 33 to 62) available for one Controller Link Network.
Data Link Table Screens
The Data Link Table Screens are used to create or edit a data link table for each
node. One screen is provided for each node.
Main Menu
Node selection
Data Link Table
Screen
(previous node)
Data Link Table
Screen
(selected node)
Data Link Table
Edit Screens
Data Link Table
Screen
(next node)
F10 (End) Key
ESC Key
F8 Key
Page Up Key
F9 Key
Page Down Key
F9 Key
Page Down Key
F8 Key
Page Up Key
F4 Key
Page Up Key
F5 Key
Page Down Key
Node Information
Screen
(nodes 1 to 32)
Node Information
Screen
(nodes 33 to 62)
Select “Edit table” from the Data Link Menu to go to a Node Information Screen.
Specify a node address on a Data Link Table Screen to display the Data Link
Table Screen for that node. If there are more than 16 nodes registered on one
Data Link Table Screen, use the Up and Down Arrow Keys to scroll up or down as
required.