Filter
Top Products
5-3SectionL: Data Link
65
Format Extension Saving supported
Controller Link Support
Software Ver. 2.00
.CL2 Yes
Controller Link Support
Software Ver. 1.10
.CLK Yes (see note 1)
CX-Net on
CX-Programmer
.CL3 No
Note 1) Data link tables containing node addresses in the range 33 to 62 cannot be
saved with Controller Link Support Software Ver. 1.10.
2) Unless saved, all data link tables in the memory will be lost wen the Control-
ler Link Support Software is exited.
3) If data link tables have been modified but have not yet been saved, a con-
firmation message will be displayed when you attempt to exit the Controller
Link Support Software.
4) “S: Save table” saves the data link tables in the computer memory. To save
the data link tables that have already been set at nodes, select “T: Transfer
table” from the Data Link Menu to read the data link tables to the computer,
then save the tables.
5) Data link table files for the Controller Link Support Software are not compat-
ible with those for the conventional SYSMAC LINK Support Utility.
1, 2, 3... 1. Select “S: Save table” from the Data Link Menu.
2. Specify the file name (including the directory) to be saved. Enter the file
name with Alphanumeric Keys, then press the Enter Key.
Use the extension .CL2 for files to be saved in Ver. 2.00 format, and use the
extension .CLK for files to be saved in Ver. 1.10 format. (If an attempt to save
a file containing node addresses 33 to 62 is made with the extension .CLK,
an error will be generated.) If the extension is omitted by the user, it will be
added automatically depending on the node addresses used, in the follow-
ing way.
• If node addresses 33 to 62 are used: .CL2.
• If node addresses 33 to 62 are not used: .CLK.
When this window appears, the data directory specified in “System setup”
will be displayed as the destination. The Insert, Backspace, and Delete
Keys can be used to correct the characters.
You can press the F8 (Files) Key to display the File Name List Screen and
then select a file name from the screen. (The extension can be changed
after the file is selected.)
If an existing file name is specified, a confirmation message will be dis-
played to ask you to check whether the file can be overwritten. Press “Y” to
overwrite the file or press “N” to cancel the save processing, then press the
Enter Key.
3. Enter a title for the file.
Enter the title with Alphanumeric Keys, then press the Enter Key. Up to 30
characters can be entered. The Insert, Backspace, and Delete Keys can be
used to correct the characters.
If no title is required, just press the Enter Key.
The file will be saved.