Filter
Top Products
5-3SectionL: Data Link
51
5-3-2 Setting Data Link Tables
Perform the following procedures to create and transfer data link tables.
1, 2, 3... 1. “Edit table” on page 52.
2. “Check table” on page 61.
3. “Transfer table” on page 67.
When necessary, use “Save table” and “Retrieve table” to save and retrieve data
link tables to/from files.
Note 1) Data link table data created or edited with the Controller Link Support Soft-
ware is recorded in the memory of the computer. The data will be lost when
the Controller Link Support Software is exited. To avoid this, use “Save
table” to save the data created or edited with “Edit table.”
2) If data link tables have already been saved or transferred, the following pro-
cedures can be used to read the tables to the Controller Link Support Soft-
ware and edit them again.
“Retrieve table” on page 66.
“Controller Link → Computer” under the Transfer Table Menu on page 67.
5-3-3 Displaying the Data Link Menu
To create or edit a data link table or manage a data link, select the corresponding
function from the Data Link Menu. Each function is described on the following
pages. The following procedure shows how to display the Data Link Menu.