Filter
Top Products
40
04 Initial Settings
Digital audio output settings
1. Press the SETUP button to open the
SETUP menu, then use the cursor
buttons (», «, |, \) to select [Initial
Settings] and press the ENTER button
(page 39).
(Use the cursor buttons (», «, |, \) to
select [Digital Audio Out].)
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Dolby Digital
Off
96 kHz > 48 kHz
MPEG Out > PCM
Initial Settings
2. Use the cursor buttons (», «, |, \) to
select and set a desired item, then press
the ENTER button to confirm the setting.
[Digital Out]
Use this setting to select whether the connected device
requires digital output.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Off
Initial Settings
On (Default)
Audio is output from the rear panel DIGITAL AUDIO OUT
connector.
Off
Audio is not output from the rear panel DIGITAL AUDIO
OUT connector.
[Dolby
*1
Digital Out]
Use this setting to select whether or not a connected de-
vice is compatible with Dolby Digital audio.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
Dolby Digital (Default)
Select this when connecting to an amplifier that supports
Dolby Digital or when connecting to a Dolby Digital de-
coder.
Dolby Digital > PCM
Dolby Digital signals are converted and output as linear
PCM signals. Select this when connecting to an amplifier
that does not support Dolby Digital.
[DTS
*2
Out]
Use this setting to select whether or not a connected de-
vice supports DTS audio.
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
Off
DTS
Initial Settings
Off (Default)
Use this setting when connecting to an amplifier that does
not support DTS.
DTS
Use this setting when connecting to an amplifier that sup-
ports DTS or when connecting to a DTS decoder.
Important
¶ Selecting [DTS] when a non-DTS amplifier is connected
may result in the generation of noise.
¶ DTS sound is not output from the AUDIO OUT (analog
audio output) jacks.
*1 Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
*2 “DTS” and “DTS Digital Out” are registered trademarks of Digital
Theater Systems, Inc.
DRE1031C_En_039-049 06.8.25, 9:12 AM40