Filter
Top Products
69
07Function for Commercial Use
English
Function for Commercial Use 07
2) With the cursor on [DELETE GROUP], press
the ENTER button.
Group
001 001 01:000301-000601
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-001)
Move Select ENTER Exit SETUP
¶ The selected group will be deleted.
¶ Since one group will be deleted, if following groups
exist, their group numbers will be decremented by one.
Caution is needed when a setting is present that uses
[GO TO GROUP] to cause a jump to occur.
3.5 Creating a new group
1) With the cursor on the name of the last group
present, press the ENTER button.
Group
001 001 01:000301-000601
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-001)
Move Select ENTER Exit
CREATE GROUP
DELETE GROUP
RETURN
Return SETUP
2) With the cursor on [CREATE GROUP], press
the ENTER button.
Group
001
Group
002
001
002
003
004
005
006
007
008
Command Stack
Group
(1-002)
Command
(0-000)
Move Select ENTER CLEARDelete Exit SETUP
¶ A new group will be created, and the cursor will move
to the command column.
3.6 Command Stack correcting
1) Place the cursor on the command you wish to
edit, and press the ENTER button.
Group
001 001
PLAY
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-001)
Move Select ENTER CLEARDelete Exit SETUP
2) With the cursor on [STACK CORRECTING],
press the ENTER button.
Group
001 001
PLAY
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-001)
Move Select ENTER CLEARDelete Exit SETUP
SEGMENT PLAY
CHAPTER PLAY
COMMAND
STACK CORRECTING
¶ If any of the remaining three functions (other than
[STACK CORRECTING]) is selected, instead of
overwriting the command, a new command will be in-
serted immediately prior to the selected command.
3) Select the newly desired command and press
the ENTER button.
Group
001
PLAY PAUSE
STEP REV
WAIT
REPEAT GROUP
GO TO GROUP
PASS THROUGH
PASS THROUGH KEY
DIVIDE GROUP
MERGE GROUP
STOP
STEP FWD
000
sec.
000
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-000)
Move Select ENTER
RETURN
Return Exit SETUP
¶ The newly selected command will overwrite the old
command.
DRE1031C_En_064-073 06.8.25, 9:15 AM69