Filter
Top Products
67
07Function for Commercial Use
English
Function for Commercial Use 07
3. Editing Command Stack
3.1 Dividing into groups
Use this function to divide a group into two groups. The des-
ignated command and all following commands will form a
new group.
1) Place the cursor over the first command to be
separated from the existing group, then press
the ENTER button.
Group
001 001 01:000301-000601
002 01:000901-001201
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-002)
Move Select ENTER CLEARDelete Exit SETUP
2) Select [COMMAND] and press the ENTER
button.
Group
001
SEGMENT PLAY
CHAPTER PLAY
COMMAND
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-002)
Move Select ENTER
RETURN
Return Exit SETUP
3) Select [DIVIDE GROUP].
Group
001
PLAY PAUSE
STEP REV
WAIT
REPEAT GROUP
GO TO GROUP
PASS THROUGH
PASS THROUGH KEY
DIVIDE GROUP
MERGE GROUP
STOP
STEP FWD
000
sec.
000
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-002)
Move Select ENTER
RETURN
Return Exit SETUP
2.3.5 PASS THROUGH KEY command
This command is used to enable/disable the PASS THROUGH
button on the DVD-V8000’s front panel.
1) With the cursor over [PASS THROUGH KEY],
press the ENTER button.
Group
001
PLAY PAUSE
STEP REV
WAIT
REPEAT GROUP
GO TO GROUP
PASS THROUGH
PASS THROUGH KEY
DIVIDE GROUP
MERGE GROUP
STOP
STEP FWD
000
sec.
002
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-000)
Move Select ENTER
RETURN
Return Exit SETUP
¶ The switching window will be displayed.
Group
001
THROUGH OUT KEY
ENABLE
CANCEL
DISABLE
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-000)
Move Select ENTER
RETURN
Return Exit SETUP
2) Use the right/left arrow buttons (|, \) to
select either [ENABLE] or [DISABLE], then
press the ENTER button.
ENABLE: Main unit’s PASS THROUGH button is enabled.
DISABLE: Main unit’s PASS THROUGH button is disabled.
¶ Setting is completed.
¶ Select [CANCEL] then press the ENTER button to re-
turn to the command selection menu.
Note
¶ When power is first turned on, the PASS THROUGH but-
ton is enabled by default.
DRE1031C_En_064-073 06.8.25, 9:15 AM67