Filter
Top Products
48
04 Initial Settings
DVI connections
Select the image resolution, aspect ratio and image quality
levels to match the device used through a DVI connection.
1. Press the SETUP button to open the
SETUP menu, then use the cursor
buttons (», «, |, \) to select [Initial
Settings] and press the ENTER button
(page 39).
2. Use the down cursor button («) to select
[Options].
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock
DVI Settings
Off (us)
Initial Settings
3. Use the cursor buttons (», «, |, \) to
select [DVI Settings].
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock
DVI Settings
Off (us)
Initial Settings
Important
¶ Cannot be selected when DVI device is not connected.
4. Use the cursor buttons (», «, |, \) to
select and set items, and then press the
ENTER button to confirm the selection.
[Resolution]
Use to select the image resolution of the DVI output.
Use the cursor buttons (|, \) to select
resolution, and press the ENTER button
to confirm.
This Pioneer logo will only be displayed when connecting
to a Pioneer device.
Resolution
Aspect Ratio
Video Memory
720 x 480P
16 : 9 (Wide)
Direct
¶ Select image resolution from the following:
•VGA (640 x 480 pixel) progressive-scan image
•720 x 480 pixel progressive-scan image
•720 x 480 pixel interlace-scan image
•720 x 576 pixel progressive-scan image
•720 x 576 pixel interlace image
•1280 x 720 pixel progressive-scan image
•1920 x 1080 pixel interlace-scan image
¶ After setting a new resolution, a confirmation message
will be displayed. Confirm the selection once more after
reading this message.
¶ If image is not correctly displayed after changing the reso-
lution, hold the remote control unit’s [0] button depressed
for 5 or more seconds to reset resolution to the value au-
tomatically set when the device was first connected to
this player.
Note
¶ The 720 x 576 pixel progressive/interlace image is
selectable only when playing a PAL disc. Also, the VGA or
720 x 480 pixel progressive/interlace image is selectable
only when playing a NTSC disc.
¶ The display image may appear rough or output may be tem-
porarily interrupted during switching of image resolution.
DVD-V8000 digital video signals (complies with EIA/CEA-861-B)
Resolution
Vertical frequency Horizontal frequency Clock frequency
(Hz) (kHz) (MHz)
VGA 59.940 31.469 25.175
480i 59.940 15.734 27.000
NTSC 480p 59.940 31.469 27.000
720p 59.939 44.955 74.175
1080i 59.939 33.716 74.175
576i 50.000 15.625 27.000
PAL
576p 50.000 31.250 27.000
720p 50.000 37.500 74.250
1080i 50.000 28.125 74.250
DRE1031C_En_039-049 06.8.25, 9:12 AM48