The Initial Setup menu
15
141
En
Audio Out
Dolby Digital Out Dolby Digital •
Output a Dolby Digital signal when a Dolby Digital source is being played.
Dolby Digital
PCM
Convert Dolby Digital sources to Linear PCM output. Use if your connected
equipment doesn’t have a Dolby Digital decoder.
DTS Out On •
Output a DTS signal when a DTS source is being played.
Off
Switch off the digital output when a DTS source is being played. Use when
your connected equipment doesn’t have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz PCM Out
96 kHz
48 kHz •
Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected
equipment doesn’t support 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is being played.
MPEG Out MPEG
Output an MPEG audio signal when a source using MPEG audio is being
played.
MPEG
PCM •
Convert sources with MPEG audio to Linear PCM output. Use if your
connected equipment doesn’t have an MPEG audio decoder.
Audio DRC On
Switches on Audio DRC (Dynamic Range Control). Use when listening to
Dolby Digital material at low volume.
Off •
Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to
Dolby Digital
. In this case adjust the
dynamic range from the receiver subwoofer — see Dynamic Range Control
on page 32
.
Language
OSD Language English •
Sets the language of the on-screen displays to English.
available languages
Choose from the languages displayed for the on-screen displays.
On Screen Display and D.TV Language will both reflect this setting.
Audio Language English •
Sets the default audio language for DVD-Video playback to English.
available languages
Choose from the languages displayed to set the default audio language for
DVD-Video playback.
Other
Select to set the default audio language to something other than the ones
listed. See
Selecting other languages for language options
on page 147.
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.
Subtitle Language English •
Sets the default subtitle language for DVD-Video playback to English.
available languages
Choose from the languages displayed to set the default subtitle language for
DVD-Video playback.
Other
Select to set the default subtitle language to something other than the ones
listed. See
Selecting other languages for language options
on page 147.
Discs do not necessarily have subtitles in your selected menu language. Also, some discs override the Subtitle Language preference.
Setting
Options Explanation
DVRLX60D_WV_EN.book 141ページ 2007年4月24日 火曜日 午後7時58分