Filter
Top Products
Listening to your system
06
28
En
• While listening to a stereo source, press SOUND
RETRIEVER.
Press repeatedly to switch between:
•
RTRV ON
— Switches the Sound Retriever on.
•
RTRV OFF
— Switches the Sound Retriever off.
Listening with Acoustic Calibration EQ
You can listen to sources using the Acoustic Calibration
EQ set in
Using the Auto MCACC setup for optimal
surround sound
on page 24.
1 Press SOUND.
2 Use the
/
buttons to select MCACC EQ then
press ENTER.
3 Use the
/
buttons to switch EQ ON or EQ OFF
then press ENTER to confirm.
• On the
EQ OFF
setting, equalization is set to off and
speaker settings (channel delay and channel level)
remains as it is set.
• Acoustic Calibration EQ is set to on automatically
after Auto MCACC setup is used.
Enhancing dialogue
The Dialogue Enhancement feature is designed to make
the dialogue stand out from other background sounds in
a TV or movie sound track.
1 Press SOUND.
2 Use the
/
buttons to select DIALOGUE then
press ENTER.
3 Use the
/
buttons to select the amount
dialogue enhancement then press ENTER to confirm.
Select between
OFF
,
MID
or
MAX
.
Using Quiet and Midnight listening
modes
The Quiet listening feature reduces excessive bass or
treble in a sound source.
The Midnight listening feature allows you to hear
effective surround sound of movies at low volume levels.
1 Press SOUND.
2 Use the
/
buttons to select TONE then press
ENTER.
3
Use the
/
buttons to select QUIET or MIDNIGHT
then press ENTER to confirm.
• To cancel the Quiet or Midnight listening modes,
select
BASS/TRE
.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall tone.
1 Press SOUND.
2 Use the
/
buttons to select TONE then press
ENTER.
3 Use the
/
buttons to select BASS/TRE then
press ENTER.
• Selecting
BASS/TRE
cancels the Quiet and Midnight
listening modes. These modes cannot be used at the
same time.
4 Use the
/
buttons to select BASS or TREBLE;
use the
/
buttons to adjust the sound then press
ENTER to confirm.
Boosting the bass level
There are two bass modes you can use to enhance the
bass in a source.
1 Press SOUND.
2 Use the
/
buttons to select BASSMODE then
press ENTER.
3 Use the
/
buttons to select the sound then
press ENTER to confirm.
Select between
OFF
,
MUSIC
or
CINEMA
.
PAU SE LIVE TV
ONE TOUCH COPY
SETUP
F. S. SURR TEST TONE
SOUNDADVANCED
SURROUND
SLEEP CLEAR
VIDEO IN
MENU
JUKEBOX
RDS DISP
DISPLAY
VOLUMECHANNEL
SUBMAIN
TV CONTROL
TV/DVDTEXT
INPUT
ENTER
SR
+/
TUNE
+
/
TUNE
-
/
ST
+/
ST
-
123
456
78
0
9
SOUND
SUBMAIN
ENTER
2
456
8
0
RCS-LX60D_WV.book 28 ページ ２００７年４月２４日 火曜日 午後７時５７分