Filter
Top Products
Recording
06
85
En
Using the recorder’s internal tuner for Pause Live TV
If you haven’t connected to your TV using a SCART cable
(or your TV is not compatible with AV Link) you can use
the recorder’s internal tuner for the Pause Live TV.
1 Press HOME MENU.
2 Select ‘Initial Setup’ > ‘Options2’ > ‘Pause Live
TV’ > ‘Recorder’s Tuner’.
See
Pause Live TV
on page 145 to do this.
You can record the channel selected on the recorder.
Using Pause Live TV
1 Start recording the current TV channel.
Recording continues with playback paused.
• Note that it may take up to 10 seconds for recording
to start.
2 Press to start playback.
You can also use the scan buttons (
/
), pause
(
PAUSE
) and stop (
STOP
) — all without affecting the
recording.
3 Press to stop the recording.
The operation is slightly different depending on the
viewing source. See the
Operation table
below for details.
Tip
•When the
Pause Live TV
setting (see page 145) is set to
TV’s Tuner
, you can press
PAUSE LIVE TV
while the
recorder is in standby to switch on and immediately
start recording. When set to
Recorder’s Tuner
, it is not
possible to use the Pause Live TV feature from standby.
• After pressing
PAUSE LIVE TV
, it will take at least 10
seconds for the picture to change (during this time,
all controls except the power button are inoperative).
(Note that startup from standby is not possible if you
have selected
Recorder’s Tuner
in
Pause Live TV
on
page 145.)
• Please note that you can’t record from another
component (VCR, etc.) that is connected by a SCART
cable to the
AV2 (INPUT 1/DECODER)
connector
using the Pause Live TV feature.
Operation table
*1 No Chase Play! Warning if you change input this will stop the recording.
2• Not all TVs support this feature. Check the instructions that came with your TV if you are unsure.
• This feature will not work unless your TV is compatible with AV Link. See the operating instructions that came with your TV if you’re unsure
about your TV’s compatibility with this feature.
PAUSE LIVE T
V
PLAY
STOP REC
Viewing source
TV/DVD
mode of DVR
DVR source
Pause Live TV
function button
Condition
TV built-in analog tuner TV – Pause Live TV Preset channel of DVR and TV are matched after
downloading from TV.
Direct TV recording
*1
Preset channel of DVR and TV are NOT matched after
downloading from TV.
Record TV programme that you’re
watching.
TV built-in digital tuner TV – Direct TV recording
*1
Preset channel info. in D.TV cannot be shared by DVR even
after Download from TV. Record TV programme that you’re
watching.
External input of TV TV – Direct TV recording
*1
Record TV programme that you’re watching.
DVR built-in analog tuner DVD DVR built-in
analog tuner
Pause Live TV
DVR built-in digital tuner DVD DVR built-in
digital tuner
Pause Live TV
DVRLX60D_WV_EN.book 85 ページ ２００７年４月２４日 火曜日 午後７時５８分