Filter
Top Products
Appendix A Specifications 65
Shutter Compensation Time
The following numbers apply for a 1 MHz ST-133.
Shutter Exposure
Vincent (small) 8.0 msec
Prontor 40 (large) 28.0 msec
Prontor 23 (external) 8.0 msec
Intensified (electronic) 6.0 msec
NONE 200 nsec
Computer Requirements
Depending on the communication protocol (TAXI or USB 2.0) the ST-133 is most
commonly used with a Pentium computer configured as follows.
Type:
TAXI: 200 MHz Pentium
®
II (or better)
USB 2.0: 1 GHz Pentium 3 (or better)
Memory (RAM):
TAXI: Minimum of 32 Mbytes; possibly more depending on experiment design and
size of CCD Array.
USB 2.0: Minimum of 256 Mb of RAM.
Operating System:
TAXI: Windows 95
®
, Windows NT
®
or later for WinView/32 and WinSpec/32.
USB 2.0: Windows 2000 (with Service Pack 3), Windows XP (with Service Pack 1)
or later operating system.
Interface:
TAXI: PCI High-Speed Serial I/O card
USB 2.0: USB Interface Card (Orange Micro 70USB90011 USB2.0 PCI is
recommended)