Filter
Top Products
Rev0.10
143
Section 4
Playing Rhythm Arrangements
Now try selecting an arrangement you like from the internal
arrangements and then have that arrangement play back.
1
Confirm that [PAD] is not lit, then press [ARRANGE]
so that the button lights.
The BR-600 switches to Arrangement mode, enabling
arrangements to be played.
fig.04-300
[RHYTHM ON/OFF] simultaneously lights, confirm
that the rhythms are enabled.
2
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select the arrangement you want to play.
P01 – P50 :
Preset arrangements 1 – 50
S01 – S05 :
Song arrangements 1 – 5
3
Press [EXIT].
Return to the Play screen.
4
Press [ZERO].
Return to the beginning of the song.
5
Press [PLAY].
When the recorder’s playback begins, the selected
arrangement begins playing.
6
Adjust the RHYTHM fader and MASTER fader to
appropriate levels.
7
Press [STOP] to stop the performance.
You can temporarily change the tempo of the arrangement
being played by carrying out the following procedure while
the Play screen is displayed.
1
Use CURSOR [ ] [ ] to position the cursor at the
indication of the tempo in the display.
fig.04-310
2
Turn the TIME/VALUE dial to adjust the tempo.
You can temporarily change the tempo of the arrangement
by the timing with which you press [TAP(TEMPO)].
Tap on [TAP(TEMPO)] four or more times to change the
tempo of the arrangement. The tempo becomes that in
which you tapped.
fig.04-290
P: Preset / S: Song
Arrangement
NameNumber
When the BR-600 is shipped from the factory, the song
arrangements (S01 – S05) contain no data, thus no
arrangements are played even when selected.
Changing the Tempo of an
Arrangement
Using the TAP Button to Change
the Tempo of an Arrangement
Tempo
• The arrangement’s tempo setting is temporarily
disabled.
• The change in tempo is only temporary. If you
want to save the change in the arrangement’s
tempo, refer to “Creating Original Arrangements”
(p. 154)
• The tempo can be set to any value from 25.0 to 250.0.
BR600_e2 143ページ ２００６年４月１７日 月曜日 午前９時３分