Roland BR-600 DVR User Manual


 
39
Using Insert Effects
Rev0.10
Quick Start
2
Press CURSOR [ ] [ ] to align the cursor up with
the effect patch, and turn the TIME/VALUE dial to
change the effect patch.
Preset patches (P)
The preset patches contain preset data. Their settings
can be changed, but you cannot create a new preset
patch.
User patches (U)
User patches can be rewritten, and are stored in
internal memory. If you have created a patch that you
would like to use for other songs as well, it is
convenient to store it as a user patch.
Song patches (S)
Like user patches, song patches can be written;
however, the data for song patches are stored along
with the song data to the memory card. This is
convenient when you have created a patch for a
specific recorded performance, and would like to store
that patch together with the song.
fig.00-360
3
Press CURSOR [ ] [ ] to align the cursor up with
the patch number, and turn the TIME/VALUE dial to
change the patch number.
4
Press [EXIT] to return to the Play screen.
For more details regarding the use of insert
effects, refer to “Using the Insert Effects” (p. 92).
1
Confirm that [PAD] is not lit, then press [EFFECTS]
to display the currently selected effect patch.
The BR-600 is set to output sound without the insert
effects applied, allowing you to record sounds without
the insert effects.
Selecting “INPUT <REC DRY>” as the point to which
the insert effects are connected allows you to record the
sounds without the insert effects while listening to the
sounds with the insert effects applied.
“Changing the destination Insert Effects are
Connected” (p. 95)
Memory Card
BR-600
User
Patch
Song
Song
Patch
Preset
Patch
Recording without insert
effects
Some effect patches are particularly effective for stereo
recording.
For recording in stereo, refer to “Selecting the
Recording Track” (p. 55).
“Effect Patch List” (p. 204)
“Algorithm List” (p. 96)
BR600_e2 39 ページ 2006年4月17日 月曜日 午前9時3分