Filter
Top Products
Rev0.10
Creating Original Patterns
145
Section 4
Creating Patterns by Tapping the Drum Pads
(Realtime Recording)
1
Confirm that [PAD] is not lit, then press [PATTERN].
[PATTERN] and [RHYTHM ON/OFF] light.
2
Press [RHYTHM EDIT].
[PAD] lights up, indicating that the drum pads are
enabled for use.
fig.04-320
3
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select a song pattern (S001 – 100).
* You cannot record to the preset patterns.
4
Press CURSOR [ ] [ ] to move the cursor to
“REAL,” and press [ENTER].
The Recording Standby screen appears in the display.
fig.04-330
5
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to set the measure, beat, and click from which to start
recording of the pattern.
Measure
This sets the number of measures in the pattern to be
recorded.
Valid Settings :
1 – 999
Tempo
When recording, this sets the tempo for confirming the
pattern.
Valid Settings :
25.0 – 250.0
* The tempo setting here is exclusively for confirmation
of the pattern recording. This tempo is not stored in the
pattern (you cannot make any individual tempo
settings for the patterns themselves).
Time Signature
This sets the time signature (i.e., the beat) for the
pattern to be recorded.
Valid Settings :
1/1 – 8/1, 1/2 – 8/2, 1/4 – 8/4, 1/8 – 8/8
Quantize
This sets the recording quantization.
Setting Quantize lets you to have the sounds being
input conform to preset note lengths, thus eliminating
discrepancies in the input timing.
* Press “HI” you want to keep the timing used to input
the sounds.
Valid Settings :
Quarter note Sixteenth-note triplet
Quarter-note triplet Thirty-second note
Eighth note
Thirty-second-note triplet
Eighth-note triplet HI
Sixteenth note
Tempo
Measure
Time Signature Quantize
BR600_e2 145ページ ２００６年４月１７日 月曜日 午前９時３分